Deep cycle lithium leisure batteries are becoming extremely popular for Off-Grid ESS Energy Storage Systems as they offer many advantages over traditional lead-acid batteries. At Lithium Pro Energy we think we’ve designed the ideal Leisure Batteries for Off-Grid systems.
A Lithium battery is perfect for use in a ESS Energy Storage System as they do not release toxic or harmful gases during charging or discharging. They are safe to have in your home with no need for gas or safety checks so you can install with full confidence. easy with your battery onboard.
At Lithiumpro we have designed our batteries specifically for use in Motorhomes, Campervans, Caravans and Boats. In particular, we have made use of the familiar Automotive style battery box with base rails for safely securing them into your vehicle. Additionally, we continue to use the high quality Brass terminal posts for the battery terminal connections. These batteries are perfectly compatible for use as ESS. However, thats where the similarities end…
Inside, there are no chemicals. We use Premium Grade A Prismatic Cells in our ArcticXtreme 150AH battery. As a result they have the ability to be cycled up to 5000 times, unlike most other cheaper grade lithium cells. In summary, this means 10+ years of daily use. We have also made them serviceable by redesigning the battery top with secure fixings in an effort to future proof your investment. We do not glue our cases but use a gasket to ensure it complies highest to IP67 submergible waterproof standards.
Weighing in at less than 60% of your old deep cycle Lead-acid leisure battery. Our Lithium batteries offer 100% useable capacity – Unlike, your existing battery you can USE all the published amp hours in a single discharge without damaging your battery. Try this 5000 times before your battery will even start to feel the strain.
Our batteries are 12v but can be easily connected in series to produce systems for 24v or 48v solar arrays. They can also be connected in parallel for increase you energy storage capacity too.
Harness the power of our intelligent SMARTIQ Batteries, enabling seamless Bluetooth connectivity to your solar system. Stay informed in real-time about the charging status of your system, effortlessly tracking key parameters.
UK’S MOST POWERFUL LITHIUM BATTERY IN A H8 DIN CASE
200A CONTINUOUS DISCHARGE CAPABILITY
RUN A 2500W CONTINUOUSLY
SMARTCOMM SERIES WITH CANBUS RS485 CONNECTIVITY COMMUNICATE DIRECTLY WITH VICTRON GX OR NMEA 2K DEVICES
UK’S MOST POWERFUL SEATBASE BATTERY
250A CONTINUOUS DISCHARGE CAPABILITY
RUN A 3200W CONTINUOUSLY
SMARTCOMM SERIES WITH CANBUS RS485 CONNECTIVITY COMMUNICATE DIRECTLY WITH VICTRON GX OR NMEA 2K DEVICES
UK’S MOST ADVANCED LITHIUM BATTERY
250A CONTINUOUS DISCHARGE CAPABILITY
RUN A 3200W CONTINUOUSLY
SMARTCOMM SERIES WITH CANBUS RS485 CONNECTIVITY COMMUNICATE DIRECTLY WITH VICTRON GX OR NMEA 2K DEVICES
12V 105AH LITHIUM LEISURE BATTERY 150A BMS.
Introducing the ULTRAVOLT our ‘Power House’ battery, engineered to supply substantial power to your appliances. This battery maintains a consistent and stable voltage even during demanding loads. As a result, it becomes the perfect choice for frequent inverter users, catering to campervans, motorhomes, boats, and various ‘off-grid’ applications.
What sets the ULTRAVOLT apart is its remarkable capacity of almost 2000Wh. This ensures a smooth operation of a 2000W Inverter. Our Premium Series batteries are equipped with cutting-edge Bluetooth 5.0 connectivity features, which are accessible through our SMARTIQ BMS APP. Allowing you to effortlessly monitor the battery’s performance and State of Charge parameters, making it easy to stay informed about its health and status.
| ELECTRICAL SPECIFICATIONS | |
| Nominal Voltage | 12.8V |
| Nominal Capacity | 105Ah |
| Energy | 1344Wh |
| Internal Resistance | ≤10 mΩ |
| Efficiency | ≥99% |
| Self Discharge | <3% per month |
| Wireless Connectivity Protocol | Bluetooth 5.0 |
| MECHANICAL SPECIFICATIONS | |
| Dimensions (LxWxH) DIN H6 | 280x178x189mm |
| Weight | 10 Kgs |
| Cycles | ≥5000 @ 80% DOD |
| Case Material | ABS |
| Enclosure Protection | IP67 |
| Terminal Type | SAE Brass Post |
| Cell Chemistry (EVE-LF105) | LiFePO4 |
| BMS PROTECTION SPECIFICATIONS | |
| Max Continuous Charge Current | 150A Recommended (75A) |
| Max Continuous Discharge Current | 150A |
| Peak Discharge | 200A (10 Secs) |
| Discharge Protection cut-off | 10V |
| Over Charge Protection cut-off | 14.5V |
| Passive Cell Balancing Voltage | 3.5V |
| Short Circuit Protection | 900<500uS |
| TEMPERATURE SPECIFICATIONS | |
| Storage Temperature | -10 ~ 45ºC |
| Discharge Temperature | -20 ~ 60ºC |
| Charge Temperature | 0 ~ 60ºC |
| RECOMMENDED (LiFePO4) CHARGING SPECIFICATIONS | |
| Charging Voltage (CCCV) | 14.6V |
| Float Voltage | 13.3-13.9V |
| Charging Current | ≤ 75A |
| Parallel & Series Connections | Max 4 (48V) |
Welcome to the all new 12V 175AH LITHIUM IRON PHOSPHATE BATTERY Part of LithiumPro’s SMARTCOMM SERIES the safest and most advance battery range to date, offering more advanced safety features and integration as standard. This battery is has been completely redesigned to provide more power in the same low profile design case (189mm high), yet its packed with more features than ever before.
| ELECTRICAL SPECIFICATIONS | |
| Nominal Voltage | 12.8V |
| Nominal Capacity | 175Ah |
| Energy | 2240Wh |
| Internal Resistance | ≤10 mΩ |
| Efficiency | ≥99% |
| Self Discharge | <3% per month |
| Wireless Connectivity Protocol | Bluetooth 5.0 |
| CANBus / RS485 Connectivity | RJ45 ports x2 |
| Power Isolation | BMS isolation on/off switch |
| MECHANICAL SPECIFICATIONS | |
| Dimensions (LxWxH) DIN H8 | 357x176x189mm |
| Weight | 16.5Kgs |
| Cycles | ≥4000 @ 80% DOD |
| Case Material | ABS |
| Enclosure Protection | IP65 |
| Terminal Type | SAE Brass Post with m8 internal thread |
| Cell Chemistry | Prismatic – LiFePO4 |
| SAFETY & PROTECTION SPECIFICATIONS | |
| Max Continuous Charge Current | 200A Recommended (>75A) |
| Max Continuous Discharge Current | 200A |
| Peak Discharge | 260A (10Secs) |
| Discharge Protection cut-off | 10V |
| Over Charge Protection cut-off | 14.6V |
| Advanced Active Cell Balancing Current | 1-5A |
| Short Circuit Protection | 900<500uS |
TEMPERATURE SPECIFICATIONS | |
Storage Temperature | -10 ~ 45ºC |
Discharge Temperature | -20 ~ 60ºC |
Charge Temperature (Heater Assisted) | -20 ~ 60ºC |
|
RECOMMENDED (LIFEPO4) CHARGING SPECIFICATIONS |
|
|
Charging Voltage (CCCV) |
14.2V-14.6V |
|
Float Voltage |
13.3-13.9V |
|
Charging Current |
≤ 75A |
|
Parallel & Series Connections |
Max 4 Parallel |
Say hello to the all new 12V 280AH LITHIUM IRON PHOSPHATE SEATBASE BATTERY Part of LithiumPro’s SMARTCOMM SERIES the safest and most advance battery range to date, offering more advanced safety features and integration as standard. This battery is has been exclusively designed by LithiumPRO as the MOST powerful seat base battery on the market. The low profile design case (180mm high), fits under your swivel seat in your campervan. VW T6.1, Fiat, Ford, Peugeot, Renault, MAN-TGE, Sprinter and many more.
| ELECTRICAL SPECIFICATIONS | |
| Nominal Voltage | 12.8V |
| Nominal Capacity | 280Ah |
| Energy | 3584Wh |
| Internal Resistance | ≤10 mΩ |
| Efficiency | ≥99% |
| Self Discharge | <3% per month |
| Wireless Connectivity Protocol | Bluetooth 5.0 |
| CANBus / RS485 Connectivity | RJ45 ports x2 |
| Power Isolation | BMS isolation on/off switch |
| MECHANICAL SPECIFICATIONS | |
| Dimensions (LxWxH) | 330x280x180mm |
| Weight | 29Kgs |
| Cycles | ≥8000 @ 80% DOD |
| Case Material | ABS |
| Enclosure Protection | IP20 |
| Terminal Type | M8 internal thread |
| Cell Chemistry | EVE Prismatic – LiFePO4 |
| SAFETY & PROTECTION SPECIFICATIONS | |
| Max Continuous Charge Current | 250A Recommended (<75A) |
| Max Continuous Discharge Current | 250A @ 25ºC |
| Peak Discharge | 260A (10Secs) |
| Discharge Protection cut-off | 10V |
| Over Charge Protection cut-off | 14.6V |
| Advanced Active Cell Balancing Current | 1-5A |
| Short Circuit Protection | 900<500uS |
TEMPERATURE SPECIFICATIONS | |
Storage Temperature | -10 ~ 45ºC |
Discharge Temperature | -20 ~ 60ºC |
Charge Temperature (Heater Assisted) | -20 ~ 60ºC |
|
RECOMMENDED (LIFEPO4) CHARGING SPECIFICATIONS |
|
|
Charging Voltage (CCCV) |
14.2V-14.6V |
|
Float Voltage |
13.3-13.9V |
|
Charging Current |
≤ 75A |
|
Parallel & Series Connections |
Max 4 Parallel |
Introducing the all new 12V 460AH LITHIUM IRON PHOSPHATE SEATBASE BATTERY Part of LithiumPro’s SMARTCOMM SERIES the safest and most advance battery range to date, offering more advanced safety features and integration as standard. This battery is has been designed by LPE for high power users that like to spend longer periods off-grid.
| ELECTRICAL SPECIFICATIONS | |
| Nominal Voltage | 12.8V |
| Nominal Capacity | 460Ah |
| Energy | 5888Wh |
| Internal Resistance | ≤10 mΩ |
| Efficiency | ≥99% |
| Self Discharge | <3% per month |
| Wireless Connectivity Protocol | Bluetooth 5.0 |
| CANBus / RS485 Connectivity | RJ45 ports x2 |
| Power Isolation | BMS isolation on/off switch |
| MECHANICAL SPECIFICATIONS | |
| Dimensions (LxWxH) | 522x269x220mm |
| Weight | 38Kgs |
| Cycles | ≥4000 @ 80% DOD |
| Case Material | ABS |
| Enclosure Protection | IP67 |
| Terminal Type | M8 internal thread |
| Cell Chemistry | EVE Prismatic – LiFePO4 |
| SAFETY & PROTECTION SPECIFICATIONS | |
| Max Continuous Charge Current | 250A Recommended (<75A) |
| Max Continuous Discharge Current | 250A @ 25ºC |
| Peak Discharge | 260A (10Secs) |
| Discharge Protection cut-off | 10V |
| Over Charge Protection cut-off | 14.6V |
| Advanced Active Cell Balancing Current | 1-5A |
| Short Circuit Protection | 900<500uS |
TEMPERATURE SPECIFICATIONS | |
Storage Temperature | -10 ~ 45ºC |
Discharge Temperature | -20 ~ 60ºC |
Charge Temperature (Heater Assisted) | -20 ~ 60ºC |
|
RECOMMENDED (LIFEPO4) CHARGING SPECIFICATIONS |
|
|
Charging Voltage (CCCV) |
14.2V-14.6V |
|
Float Voltage |
13.3-13.9V |
|
Charging Current |
≤ 75A |
|
Parallel & Series Connections |
Max 4 Parallel |
Delivery is free to all mainland UK, with the exception of NI, Scotland and the isles. Our couriers charge a small premium to delivery to these locations. This will be calculated at checkout based on your postcode.
