Victron Blue Smart IP22 12v 30A Battery Charger – 1M Kit

This kit is pre-configured for LithiumPro batteries and comes pre-assembled with 2x 1m lengths of 16mm2 cable including lugs and ferrules finished with heat shrink cable.  Ready for easy installation.

The 12v 30A IP22 Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart charger is suitable to charge your Lithium batteries in Motorhomes, campervans, caravans and boats, but can also charge all other lead acid battery types.

The 30A Blue Smart IP22 6-stage battery charger with built-in Bluetooth is a professional quality charger featuring microprocessor-controlled, adaptive charging technology. The battery management software monitors the way the battery is used and automatically optimises the charging process to suit the usage pattern, so maintaining your battery in the best possible condition.

This smart, multi-stage charger operates at up to 93% efficiency and generates up to 4x less heat than some other comparable chargers. When the battery is fully charged and has not been used for 24 hours, storage mode kicks in and power consumption drops to less than 0.5W. Cooling is achieved by a near-silent fan and the unit is fully protected against over-temperature, short circuit and reverse polarity.

Built-in Bluetooth allows you to monitor the status of your charger via any Android or Apple device and all settings of the charger can be configured with the VictronConnect app.

Recommended for batteries with a capacity in the range of 150 – 250Ah 

Features

• 6-stage adaptive charging (Test – Bulk – Absorption – Recondition – Float – Storage)
• High efficiency and low heat generation
• Charges all lead-acid batteries (flooded, AGM, Gel) and Lithium-Ion batteries
• NIGHT and LOW setting – reduces to 50% nominal output and no-fan for silent operation
• Near-silent fan
• Over-temperature protection
• Short-circuit protection for DC output
• Reverse polarity protection for AC input (ATO blade fuse)
• Green LED to indicate Power ON
• Yellow LED for charge status indication (Bulk-fast blinking / Absorption-slow blinking / Float-solid / Storage-off)
• Screw terminals for connection
• Can be used as a power supply when no battery is connected
• Charger reduces output current at high temp rather than shut-down
• Setup, configuration and monitoring by Bluetooth connection
• Multiple units can be wired in parallel to increase output
• 5-year manufacturer’s warranty
• NOTE: Charger does not come with any leads to connect to battery.

DOWNLOAD DATASHEET HERE.