Replacement LithiumPro remote isolation cable

A proprietary 0.5m metre cable designed to work with SMARTCOMM SERIES Lithium batteries from Lithium Pro Energy that enable your battery to be remotely isolated without needed to disconnect heavy duty battery cables.
A single panel mountable button for functionality and safety. Locate the button away from your power source mount in a position that is easily accessible to you enabling easy safe power isolation of your battery.  Ideal for winterisation and general maintenance of power system.

Operating instructions:
Plug the isolation cable into the POWER (PWR) port on your battery.
Ensure main master switch is turned on at the battery.
When the light is illuminated on the isolation cable button the battery state is ON
Depress remote power button to isolate battery – the battery state is OFF

Panel mounting instructions:

The button can be separated from the cable to enable panel mounting by depressing blue plastic lever on the top of the rear of the plastic housing.  To separate, gently pull the button from the blue housing. A 16mm hole should be drilled in your panel to allow the button to be mounted. It can be secured using the threaded nut at the rear.

The remote isolation cable can be used on the following SMARTCOMM SERIES models

ULTRAVOLT V2
ARCTICXTREME V2
ARCTICXTREM PRO
SEATBASE V2
SEATBASE PRO
New MEGAVOLT
New POWERHAUS

View the SMARTCOMM SERIES range